Specific Safety Rules - ENAR VOLGA MX-510-1305 Manual De Instrucciones

3.5 SPECIFIC SAFETY RULES

For the proper operation of the motor, MAKE SURE that operators have been instructed in the
proper management of this machine.
DO NOT CONNECT the flexible shaft to the motor when this is working.
DO NOT OPERATE in the motor shaft when this is working and without transmission.
DON NOT WORK with transmission in bad conditions, the motor overheats.
DO NOT PERMIT untrained personnel to operate the motor or connections.
MAINTAIN free ventilation of air.
KEEP the motor (not supplied) in a clean and dry area.
Proper protective equipment SHOULD BE USED because the acoustic power level of this machine
is 97 dB and the acoustic pressure level is 91 dB using ENAR engines (not supplied).
First read the instructions about the petrol engine (not supplied), where the transmissions are
connected .
For the proper use of this device, please make sure that the operator has been correctly informed of
the content of this manual before using it.
This water pump can be used only under the applications for which it has been designed and
according to these safety instructions.
Please assure that the end piece of the transmission is correctly connected to the motor's coupling.
Make sure that the water pump is correctly screwed to the transmission before using it (Hold the
shaft and screw on the left).
Do not over bend the transmission.
Do not apply too much grease to the inner core, it can damage the bearing of the water pump.
Do not connect the transmission to the motor while is running.
When you connect the water pump to a petrol engine, make sure that the revolutions of the motor
don't get over 3000 rpm.
Realize the operations of maintenance with the recommended types and quantities of lubricants.
Do not allow inexperienced or not trained personal to use the pump alone.
Make sure that all components are connected firmly. Otherwise this could result in damage to or
malfunction of the submersible pump.
Make sure that no objects are on or can fall on flexible shaft or outlet hose. Otherwise this could
result in damage to components or the interruption of the pumping process.
The jet of water from the outlet hose could contain small stones travelling at great speed. Do not
direct the water jet towards other personnel, as this could cause injury.
The Pump should never be operated without the bottom casing. The unguarded impeller could cause
serious injury to the user.
Ensure the Strainer is free from intruding objects such as Steel Mesh Wires or metal objects which
could jam the Impeller
Never Pump solvents, fuel or any explosive, flammable or corrosive liquids.
Some vibration from the Pump is transmitted through the Flexible Shaft to the operator's hands.
Operational exposure time may need limiting.
VOLGA IMMERSION PUMPS
PUMP UNIT 3" + FLEXIBLE SHAFT 6m VOLGA
en
5