Assembly - Tunturi F20 Manual Del Usuario

Ocultar thumbs Ver también para F20:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
adjustments other than those described
in this guide. Everything else must
be left to someone familiar with the
maintenance of electromechanical
equipments and authorised under the
laws of the country in question to carry
out maintenance and repair work.
SAV E T H I S I N S T RU C T I O N M A N UA L
WELCOME TO THE WORLD OF TUNTURI
EXERCISING!
Your choice shows that you really want to invest in
your well being and condition; it also shows you
really value high quality and style. With Tunturi
Fitness Equipment, you've chosen a high quality,
safe and motivating product as your training
partner. Whatever your goal in training, we are
certain this is the training equipment to get you
there. You'll find information about using your
exercise equipment and what makes for efficient
training at Tunturi's website at www.tunturi.com.

ASSEMBLY

Start by unpacking the equipment and check that
you have the following parts:
Frame
1.
Rear support
2 .
Plastic covers for front support (2 pcs)
3 .
Front support
4 .
Pedals (2 pcs)
5.
Seat support
6 .
Seat
7.
Handlebar support
8 .
Handlebar
9.
Console
10.
Console back cover
11.
Assembly kit (contents marked with in the
12 .
spare part list): keep the assembly tools, as you may
need them e.g. for adjusting the equipment.
If necessary, please contact your dealer with the
model, equipment serial no. and spare part no.
of the missing part. You'll find a spare part list at
the back of this guide. The packaging includes a
silicate bag for absorbing moisture during storage
and transportation. Please dispose of the bag once
you have unpacked the equipment. The directions
left, right, front and back are defined as seen from
the exercising position.
O W N E R ' S M A N U A L
SUPPORT FEET
Push the grey plastic covers in place at both
1.
ends of the rear support so that the support
retainers are aligned with the oval holes of the
covers. Fasten under the support with adjustment
screws.
Place the rear support underneath the rear part
2 .
of the frame.
Fasten the rear support with hex screws and
3 .
washers.
Place front support underneath the front part of
4 .
the frame and fasten with hex screws and washers.
PEDALS
The pedals are distinguished by the markings
1.
R (= right) and L (= left) on their shafts. Fasten
the right pedal to the right pedal crank turning
clockwise and the left pedal to the left pedal crank
turning counterclockwise.
Fasten the pedal bands first into the retainer
2 .
at the device. Thread the band through the
pedal loop and push the band opening into the
projection in the pedal.
Fasten the pedal bands to the pedal outside.
3 .
Push the band through the locking buckle and the
band locks automatically.
The length of the band can be adjusted with the
4 .
locking buckle.
G B
F 2 0
3

Publicidad

Tabla de contenido
loading

Tabla de contenido