Technical Data; Warranty; Ec Declaration Of Conformity - GreenWorks GD40CS18 Manual Del Operario

EN
Problem
The machine
does not start.
The motor runs,
but the chain
does not cut cor-
rectly, or the mo-
tor stops after
around 3 sec-
onds.
8

TECHNICAL DATA

Voltage
Possible cause Solution
Pull the chain
brake in the di-
The chain brake
rection of the
is engaged.
user to disen-
gage it.
Make sure that
The machine the battery re-
and battery are lease button
not connected clicks when you
correctly. install the battery
pack.
The battery level Charge the bat-
is low. tery pack.
1. Push the
lock-out but-
The lock out but-
ton and hold
ton and the trig-
it.
ger are not push-
ed at the same
2. Push the trig-
time.
ger to start
the machine.
The battery is Refer to battery
too hot or too and charger
cold. manual.
Release the trig-
The machine is
ger and start the
in the protection
machine again.
mode to protect
Do not force the
the PCB.
machine to cut.
Charge the bat-
tery. Refer to the
The battery is battery and
not charged. charger manual
for correct charg-
ing procedures.
Lubricate the
chain to de-
crease the fric-
tion. Do not let
The chain is not
the guide bar
lubricated.
and the chain
operate without
sufficient lubri-
cant.
Cool the battery
Incorrect battery pack until it de-
storage tempera- creases to the
ture ambient temper-
ature.
40 V DC
English
No load speed
Guide bar length
Chain stop
Chain oil capacity
Weight (without battery
pack)
Measured sound pres-
sure level
Measured sound power
level
Guaranteed sound power
level
Vibration
Chain
Guide bar
9

WARRANTY

(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage) from
the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described in
the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Address:
Name and address of the person authorised to compile
the technical file:
Name:
10
20 m/s
400 mm
< 0.2 s
180 ml
3.8 kg
L = 92dB(A), K
pA
dB(A)
L = 101.1dB(A)
wA
L = 104 dB(A)
wA.d
2
4.9 m/s , K = 1.5 m/s
90PX056X/CL14356
164MLEA041/
M1431656-1041TL
GLOBGRO AB
Globe Group Europe
Propellergatan 1, 211 15 Malmö,
Sweden
Peter Söderström
= 3
pA
2