The Remote Control Does Not Work; No Picture Or Sound; Specifications - Engel ENGELDROID TDT2 4K EN1020K Manual De Usuario

8.5 The remote control does not work

- Make sure the batteries are good and they are inserted correctly in the remote con-
trol.
- Make sure no objects block the path between the remote control and the signal sen-
sor area on the product.
- Make sure the distance between the remote control and the box is no more than 5
meters.
- Check the batteries for power, and if exhausted replace the batteries in the remote
control.

8.6 No picture or sound

- Check if the Audio/ Video output connection from the product to TV correctly.
- Press the MUTE button Turn TV on.
9. Specification
Hardware
Chipset
RAM
Flash
Network
Wi-Fi
Ethernet
DVB-T/T2 Tuner & Demodulator
Demodulator Mode
Frequency Range
RF Input Connector
Video
Video Decoding
Video File Format
HDMI Output
Amlogic S905-D Quad Core Cortex-A53 1.5GHz
1GB DDR3
8GB eMMC
802.11 b/g/n 2.4G Wi-Fi
100 Mbps Fast Ethernet
ETSI EN 302-755 V1.3.1 & EN 300-744 V1.6.1 compliant
52.5MHz to 866MHz
IEC-Female
H.265 HEVC MP@L5.0 up to 10bits HDR 4K*2K@60fps
H.264 AVC MP@L5.1 up to 10bits 4K*2K@60fps
MPEG-4 ASP@L5 up to 1080P@60fps
AVS Jizhun Profile up to 1080P@60fps
MPEG-2 MP@HL up to 1080P@60fps
MPEG-1 MP@HL up to 1080P@60fps
RealVideo 8/9/10 up to 1080P@60fps
WebM up to VGA
Support MKV, WMV, MPG, MPEG, DAT, AVI, MOV, ISO, MP4,
RM, JPG, BMP, GIF, etc...
HDMI 2.0 (video format default @ Auto), Support
HDCP2.2
53