kiwy S 123 Manual De Instrucciones página 13

Make sure that the vehicles seat belt is tight and the car seat is held
firmly in place every time you use the car seat.
Check every time you place your child in the car seat that the safety
harness is properly adjusted and the buckle is correctly locked.
Regularly check the car seat for signs of wear, especially the cover, the
harness and the buckle.
Should the child car seat be worn, contact your retailer's after-sales
service.
Check every time you fit the car seat that the vehicle seat belt has not
become twisted.
Before travelling, check that luggage or other heavy or sharp objects
are secured in the car.
Loose objects are liable to cause injury in the event of an accident.
When travelling with other passengers using both the front and rear
seats, the lighter occupant should be in the rear of the vehicle and the
heavier occupant in the front passenger seat.
Also make sure that each passenger uses the vehicle safety belts
correctly.
Whenever the car seat is left in the vehicle without the child in it,
always ensure it is correctly fitted using the vehicle seat belt, to
prevent it from being thrown about in the event of an accident.
Car interiors can become very hot when left in direct sunlight. It is
therefore recommended that the car seat, when not in use, is covered
by ( for example ) a towel. This prevents components, particularly
those attached to the child car seat, becoming hot and burning the
child.
b. Things not to do
Never use the child seat without fastening the child's harness correctly,
and never use it without fastening it into the car, as described in these
instructions.
Never place any padding between the base of the car seat and the
vehicle seat, as it could impair the safety of the car seat.
Do not add or modify this product in any way.
Never use spare parts that are not recommended or supplied by the
manufacturer.
3