Care And Cleaning - Dometic Waeco MagicWatch MWE900 Instrucciones De Montaje

_MWE-900.book Seite 51 Freitag, 12. Januar 2007 4:53 16
MagicWatch MWE900
➤ Change the value:
– Press the left-hand button to increase the value.
– Press the right-hand button to reduce the value.
➤ Press the right-hand button for longer than two seconds to save the value.
✓ The display shows the number of the selected parameter, e.g. the range
of the rear middle sensors: 04.
To stop setting the parameters without saving your changes, or to stop the
entire setting process:
➤ Do not press any button for a while.
Restoring the factory settings
If you have made your own settings, you can restore the factory settings as
follows:
➤ Press both buttons for longer than two seconds.
✓ The display shows F5.
9

Care and cleaning

Caution!
Do not use sharp or hard objects to clean the device as these may
damage the sensors.
➤ Clean the sensors with a damp cloth from time to time.
Care and cleaning
51