Trotec B025 Manual De Instrucciones página 18

TV-out
• The unit can be connected to a TV or an external
monitor by means of a video cable. Plug one end of
the cable into the TV-out port and the other end into
the jack of your external monitor (yellow = video; red
left channel; black = right channel).
• Go to the "TV-out" in the main menu to set the
TV format and select either NTSC or PAL depending
on which country you live in. Move the cursor
through the menu items with the help of the < key
or the > key to get to the parameters which you
would like to change. Press the "OK" key to save
the setting. The display goes black. The image is
now displayed on the connected TV or monitor.
the menu can only be seen on the external
monitor in this mode.
Open the "TV-out" menu to return to the videoscope
display. Activate the menu item "LCD-out" and con-
firm.
B - 7
Memory Options
• Use the Photo key ( ) or the Video key ( V ) to
select between the Flash memory (internal) and the
SD memory (SD card). Select between "Workspace",
"Format" and "Exit" with the help of the < and > keys.
By selecting AND confirming "Format" you will delete
ALL data in the memory space that has been selected.
warnInG: You cannot reverse this step once
it has been performed!!
Image/Video depiction (Explorer)
• Use the < and > keys to move the cursor to the
desired menu item. Press the " OK " key to save the
setting. The video sequences can be called up under "
Video " whereas stored images can be called up under
" Picture ". Use the < and > keys to select individual
images/videos.Press the " OK " key briefly while the
video is playing to change to " Pause " mode. Press the
" OK " key again briefly to leave the " Pause " mode.
Operating Manual – Mini-Videoscope EN