Installing The Remote Control Battery - Sherwood S9 Instrucciones De Funcionamiento

Installing the Remote
Control Battery
1
Press inward to release the lock (1),
and at the same time, slide the battery
holder out of the remote control with your
fingernail (2).
2
Place the "+" (top) side of the battery
down into the battery holder.
3
Push the battery holder back into its
original position.
Caution
• If the battery is placed incorrectly, it can
cause explosion.
• Use only one CR2025 (3 V) lithium
battery.
• Remove the battery if the remote control
is not used for a long period of time.
• Do not leave the product in a hot or
humid place.
• Do not handle and store the battery with
metallic tools.
Installation
11