Orbegozo RRW 600 Manual De Instrucciones página 32

RRW 600 1200 1500 2000
Notice : When you switch on the Radiator, the microprocessor reads the internal memory of the
appliance and remembers the last mode set by the user.
In the first power on, the memory is empty, reason why the screen will blink constantly until any
key is pressed.
Once the heater has been correctly placed and plugged into the socket, please press "Main Power
switch" to " I " position to have voltage in it. (Fig 7)
when connected to the power supply success ,OFF symbol will appear on the display.(Fig.8)
OFF position
Fig.7 Fig.8
How to choose working mode :
we press (Fig 9), the appliance will go on and one of these displays will appears one of the below
four modes.(1-4)
Fig.9
4. Comfort Mode. (Fig.10)
We set the Comfort temperature according to our requirements by pressing button + or. –
32