Safety Key - Tunturi platinum 8610 Manual Del Usario

Safety Key

A safety key is provided with this unit. It is a simple mag-
netic design that should be used at all times. It is for your
safety should you fall or move too far back on the running
belt.
Pulling this safety key will stop running belt movement.
To Use:
1. Place the magnet into position on the console control
head. Your treadmill will not start and operate without this.
2. Fasten the plastic clip onto your clothing securely to
assure good holding power. Note: The magnet has strong
enough power to minimize accidental, unexpected stop-
ping. The clip should be attached securely to make certain
it does not come off. Be familiar with its function and
limitations. The treadmill will stop, depending on speed,
with a one to two step coast anytime the magnet is pulled
off the console. Use the red Stop / Pause switch in normal
operation.
SAVE THIS INSTRUCTION MANUAL
English
4