Declaration Of Conformity - MIRKA DEOS 383X Instrucciones De Manejo

en

Declaration of conformity

Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the products Mirka® DEOS 81x133 mm (3x5") & 70x198 mm (3x8") 10,000
rpm Electrical Orbital Sander (See "Technical data" table for particular model) to which this declaration relates are
in conformity with the following standards or other normative documents: EN 60745-1:2006, EN60745-2-4:2002+A1,
EN 55014-1, EN 55014-2 in accordance with regulations 2006/42/EC, 2014/30/EU, 2011/65/EU .
Jeppo 30.06.2017
Place and date of issue
Operating instructions include:
Exploded view, Parts list, Declaration of
conformity, Important, Warning, Caution,
Additional safety warnings, Compliance,
Technical data table, Noise and vibration
information, Proper use of tool, Work stations,
How to get started, Operating instructions,
Bluetooth, Maintenance, Replacing the
backing pad, Pad Saver, Further service,
Troubleshooting guide, Disposal information .
We reserve the right to make changes to this manual without prior notice .
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool . Keep these
instructions in a safe and accessible location .
Required personal safety equipment
Read
operator's manual
Warning: Potentially hazardous situation that may result in death or serious injury and/or property damage .
Caution: Potentially hazardous situation that may result in minor or moderate injury and/or property damage .
Please read and comply with
• General Industry Safety & Health Regulations, part 1910, OSHA 2206, available from:
Superintendent of Documents; Government Printing Office; Washington DC 20402
• Safety Code for Portable Air Tools, ANSI B186 .1 available from:
American National Standards Institute, Inc .; 1430 Broadway; New York, New York 10018
• State and local regulations
8
Mirka® DEOS • 81 x 133 mm (3" x 5") & 70 x 198 mm (3" x 8")
Wear
safety glasses
CONFORMS TO UL STD
60745-1, 60745-2-4
CERTIFIED TO CAN/CSA STD
C22 .2 No . 60745-1, C22 .2 No . 60745-2-4
Company
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel . +358 20 760 2111
Fax +358 20 760 2290
www .mirka .com
Wear
ear protection
Stefan Sjöberg, CEO
Wear
safety gloves
Wear
face mask