Introduction
Make sure you don't get caught by surprise when someone's at the door with this smart
video intercom system. The outdoor unit consists of a doorbell with pinhole camera, night
view, loudspeaker and microphone. With the super thin 7" display, only 1.8 cm, you can see
who's at the door and speak with this visitor without the need of picking up a receiver. Just
push the button to open the connection. Furthermore, it's hands free.
Installation of the indoor monitor
1. Determine the position for the monitor.
2. Mount the bracket by drilling holes in the wall.
3. Make an extra hole for the cable to pass
through.
4. Connect the wires as shown in the image
below.
5. Place the monitor on the bracket with the slots
at the backside of the monitor.
1. White (AUDIO)
2. Red (VDD)
3. Black (GND)
4. Yellow (VIDEO)
A. Power 15 V DC
B. Connection to outdoor unit
Installation of the outdoor unit
± 180 cm
38°-50°
± 65 cm
± 110 cm
± 50 cm
2
ENGLISH
± 50 cm
± 110 cm