Electric Garden Shredder (Stihl Ghe) - Stihl GHE 355 Manual De Instrucciones

If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Damage to the motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots, cooling ribs, fan
wheel).
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage to the machine through the
use of inferior-quality spare parts.
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
14. Standard spare parts
Blade disc assembly
6011 700 5100
Combination blade
6011 702 5100
Wing blade 1
6011 702 0300
Wing blade 2
6011 702 0310
Wing blade 3
6011 702 0320
Set of shredding blades
6011 007 1000
0478 201 9914 B - EN
15. Environmental protection
Shredding material should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life.
15.1 Disposal
Render the machine unusable prior to
disposal.
In particular, remove the power cable and
electric cable to the motor for this purpose.
Risk of injury from the blades.
Always store an old garden shredder in a
safe place prior to scrapping. Make sure
that the machine and the blades are kept
out of the reach of children.
16. EU - Declaration of
conformity
16.1 Electric garden shredder
(STIHL GHE)
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
the machine
Shredding machine for plant trimmings
with electric motor (STIHL GHE)
manufacturer's STIHL
brand:
type: GHE 355.0
GHE 375.0
Serial number 6011
conforms to the following EU directives:
2000/14/EC, 2011/65/EU, 2014/30/EU,
2006/42/EC
The product has been developed in
conformity with the following standards:
EN 50434, EN 60335-1, EN 55014-1, EN
55014-2, EN 61000-3-2, EN 61000-3-3
The versions of the standards valid on the
production date apply to development and
production of the products.
Applicable conformity assessment
procedure:
Appendix V (2000/14/EC)
Name and address of relevant, named
location:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Compilation and storage of technical
documentation:
Sven Zimmermann
STIHL Tirol GmbH
The year of manufacture and machine
number appear on the rating plate of the
machine.
Measured sound power level:
GHE 355.0 97.4 dB(A)
GHE 375.0 97.4 dB(A)
51