Nailer Safety Warnings - Craftsman 315.FS2000 Manual Del Operador

 Always assume that the tool contains nails. Careless
handling of the nailer can result in unexpected firing of
nails and personal injury.
 Do not point the tool towards yourself or anyone
nearby. Unexpected triggering will discharge the nail
causing an injury.
 Do not actuate the tool unless the tool is placed
firmly against the workpiece. If the tool is not in
contact with the workpiece, the nail may be deflected
away from your target.
 Disconnect the tool from the power source when the
fastener jams in the tool. While removing a jammed
fastener, the tacker may be accidentally activated if it is
plugged in.
 use caution while removing a jammed nail. The
mechanism may be under compression and the nail
may be forcefully discharged while attempting to free a
jammed condition.
 Do not use this nailer for fastening electrical cables.
It is not designed for electric cable installation and may
damage the insulation of electric cables thereby causing
electric shock or fire hazards.
 Hold power tool by insulated gripping surfaces,
when performing an operation where the nail may
contact hidden wiring. Nails contacting a "live" wire
may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
 Know your power tool. Read operator's manual
carefully. learn its applications and limitations, as
well as the specific potential hazards related to this
power tool. Following this rule will reduce the risk of
electric shock, fire, or serious injury.
 Always wear eye protection with side shields
marked to comply with ANSI Z87.1. Everyday glasses
have only impact resistant lenses. They are not safety
glasses. Following this rule will reduce the risk of serious
personal injury.
 Eye protection which conforms to ANSI specifications
and provides protection against flying particles both
from the FRoNt and SIDE should AlWAYS be worn by
the operator and others in the work area when loading,
operating or servicing this tool. Eye protection is required
to guard against flying fasteners and debris, which could
cause severe eye injury.
 the employer and/or user must ensure that proper
eye protection is worn. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard safety
glasses that provide protection against flying particles
both from the front and side. Always use eye protection
which is marked to comply with ANSI Z87.1.
 Additional safety protection will be required in
some environments. For example, the working area
may include exposure to noise level which can lead to
hearing damage. The employer and user must ensure
that any necessary hearing protection is provided and
used by the operator and others in the work area. Some

NAIlER SAFEtY WARNINGS

5 – English
environments will require the use of head protection
equipment. When required, the employer and user must
ensure that head protection conforming to ANSI Z89.1-
1997 is used.
 Keep fingers away from trigger when not driving
fasteners to avoid accidental firing.
 use safety equipment. Always wear eye protection.
Dust mask, nonskid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
 protect your lungs. Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the
risk of serious personal injury.
 protect your hearing. Wear hearing protection during
extended periods of operation. Following this rule will
reduce the risk of serious personal injury.
 Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
 Do not place battery tools or their batteries near
fire or heat. This will reduce the risk of explosion and
possibly injury.
 use the tool only for its intended use. Do not
discharge fasteners into open air.
 Use the tool only for the purpose for which it was
designed.
 use only the nails recommended for this tool. Use of
the wrong nails could result in poor nail feeding, jammed
nails, and nails leaving the tool at erratic angles. If nails
are not feeding smoothly and properly, discontinue their
use immediately. Jammed and improperly feeding nails
could result in serious personal injury.
 Never use this tool in a manner that could cause a
nail to be directed toward anything other than the
workpiece.
 Do not use the tool as a hammer.
 Always carry the tool by the handle.
 Do not alter or modify this tool from the original
design or function without approval from the
manufacturer.
 Always be aware that misuse and improper handling
of this tool can cause injury to yourself and others.
 Never clamp or tape the trigger or workpiece
contact in an actuated position.
 Never leave tool unattended if the battery is installed.
 Do not operate this tool if it does not contain a
legible warning label.
 Keep the tool and its handle dry, clean and free from
oil and grease. Always use a clean cloth when cleaning.
Never use brake fluids, gasoline, petroleum-based
products, or any strong solvents to clean your tool.
Following this rule will reduce the risk of loss of control
and deterioration of the enclosure plastic.