Safety Measures Associated With Charger And Battery Use - pellenc Rasion Easy Guia Del Usuario

SAFETY INSTRUCTIONS
p. Stop the machine and turn off the battery and remove the battery connector. Make sure all moving parts have completely
stopped.
q. Stop the machine and remove the power-off device. Make sure all moving parts have completely stopped
- before leaving the machine,
- before cleaning blockages or unclogging the chute,
- before checking, cleaning or repairing the machine,
- after impact with a foreign object. Inspect the machine to detect any damage and make repairs before restarting and
using it.
If the machine starts to vibrate abnormally (check it immediately)
- inspect the machine to see if it is damaged,
- repair or replace any damaged parts,
- check if the parts are loose and tighten if necessary.
Maintenance and Storage
a. Make sure all nuts, bolts and screws are kept tight to be sure that the equipment is in good operating condition.
b. Check for wear or damage to the collecting bin frequently.
c. Replace worn or damaged parts so that the machine remains safe.
d. Take all precautions necessary when it comes to multi-blade machines, since the rotation of a cutting element can cause
the rotation of all of the others.
e. When adjusting the machine, avoid getting fingers caught between the moving blades and the fixed parts.
f. Always allow the machine to cool down before storing.
g. Pay attention during routine maintenance of the cutting elements, they may still be moving, even if the power source is cut
off.
h. Replace worn or damaged parts so that the machine remains safe. Only use original spare parts and accessories.

SAFETY MEASURES ASSOCIATED WITH CHARGER AND BATTERY USE

Please refer to the battery instructions of the relevant Pellenc tools.
6