Mowing Controls - pellenc Rasion Easy Guia Del Usuario

ACCELERATION AND HANDLING OF THE TOOL

MOWING CONTROLS

Command 4: Turning the cutting blades
- Press the start button (6) with one hand and keep it
pressed down.
- Use your other hand to pull the bar (2).
- Release the start button (6). The motor starts.
CAUTION: For your safety always keep the four wheels on the ground. Do not run when you are
pushing the lawn mower. Be even more careful when mowing on bumpy and uneven ground
and when the collecting bin is full.
- The blade rotation speed can be set with the blade speed cutting adjustment knob located
on the control box.
- The speed of the cutting blades can be configured in AUTO mode:
1 steady green LED = 3000 to 5000 rpm depending on the difficulty of the mowing area.
- The speed of the cutting blades may be manually configured:
2 fixed LEDs = 3000 rpm; 3 fixed LEDs = 4000 rpm; 4 fixed LEDs = 5000 rpm.
- The rotation speed of the cutting blades is active as long as the bar is held.
Command 5: Rotation of the cutting blades with the Boost function
- Release and pull on the bar (2) very quickly.
2
In Boost mode the mower accelerates to its maximum speed (5000 rpm) for 2.5 seconds, then
returns to its set speed.
The 4 LEDs are on when it is at maximum speed.
The boost function can be activated at any time in both automatic or manual mode. It is useful
when mowing irregularities are encounter (tall, dense grasses etc.) and avoids having to change
the initial settings of the mower.
18
6
2
2