External Cleaning - BORETTI BCHR-80 Instrucciones De Uso

MAINTENANCE
! Before cleaning or maintenance cut the power.
Cleaning the hood
WHEN TO CLEAN IT: clean it at least every 2 months
EXTERNAL CLEANING: use a cloth moistened in
lukewarm water and neutral detergent (for painted
hoods.
INTERNAL CLEANING: use a cloth (or brush) soaked
in denatured ethyl alcohol.
WHAT NOT TO DO: do not use abrasive or corrosive
products (e.g. metal sponges, brushes, too hard
brushes, very aggressive detergents, etc.)
WHEN TO CLEAN IT: clean it at least every 2 months
HOW TO REMOVE THE FILTERS: push the catch near
the handle towards the rear of the hood and pull the
HOW TO CLEAN THE FILTERS: hand wash or in the
dishwasher using a neutral detergent. If washing in the
in any way compromise their functioning.
WHEN TO REPLACE IT: replace it at least every 6
months.
HOW TO REMOVE IT:
Replacing the lamps
- To change the halogen lamps open the cover levering
from the proper slots. Replace it with a lamp of the
same type.
If thr light spot is damaged, it must be replaced only by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard
MALFUNCTIONS
If something appears not to be working properly, do
the following simple checks before calling Technical
Service:
• If the hood is not working:
Check that:
- The power has not been disconnected.
- A speed has been selected.
•
Check that:
-
of smoke and vapours released.
-
intake.
-
version).
• If the hood has turned off during normal functioning:
Check that:
- The power has not been disconnected.
- the omnipolar disconnection device has not tripped.
Components not provided with the product