Before Returning For Repairs; Specifications; Replacement Parts/Accessories - Battery Extender BE01253 Manual Del Usuario

PROBLEM
The unit won't power my 12V
device.
The battery in the unit won't
hold a charge.
The compressor shuts off.
(Model BE01254 only.)

8. BEFORE RETURNING FOR REPAIRS

For REPAIR OR RETURN, contact Customer Service at 1-800-621-5485.
DO NOT SHIP UNIT until you receive a RETURN MERCHANDISE AUTHORIZATION
(RMA) number from Customer Service at Schumacher Electric Corporation.

9. SPECIFICATIONS

Internal battery type ....................................Sealed, maintenance-free, AGM, lead-acid
Nominal voltage .................................................................................................12V DC
12V DC power output............................................................................... Rated for 15A

10. REPLACEMENT PARTS/ACCESSORIES

Compressor adapter kit and bag (for model BE01254) ........................... 2299001425Z
Male-to-male accessory cable ........................................................................94500109
POSSIBLE CAUSE
The 12V device is not
turned on.
The unit's battery is not
charged.
The 12V device draws more
than 15A or has a short
circuit.
The battery is bad (will not
accept a charge).
The compressor is
overheated.
If these solutions do not eliminate the problem,
or for more information about troubleshooting,
contact customer service for assistance:
services@schumacherelectric.com
www.batterychargers.com
or call 1-800-621-5485
Monday-Friday 7:00 to 5:00 CST
am pm
• 7 •
SOLUTION
Turn on the 12V device.
Check the battery charge
status by pressing the Battery
Status button.
Disconnect the 12V device.
The internal breaker will
automatically reset after a
minute or two. Try the 12V
device again.
Have the battery checked.
Allow to cool for a few
minutes, then try again.