Language Selection - Parker Hiross ATT Serie Manual De Uso

English
4.5 Stop
It is possible to stop the dryer in two diff erent mode:
• NORMAL
• FORCED
Y
Is recommended to use the option "Normal".
Y
Use the option "Forced" only if necessary.
Mode stop "NORMAL":
Press
to enter on "Main Menu"
Select START/STOP
press Enter to confi rm
Select NORMAL START/STOP
press Enter to confi rm
Press Enter to confi rm the STOP
Y
IMPORTANT: wait for the dryer to perform the complete cycle of
regeneration, IT IS ABSOLUTELY PROHIBITED TO STOP THE
FLOW OF AIR UNTIL THE STOP OF THE DRYER.
Mode stop "FORCED".
Press
to enter on "Main Menu"
- - -Main Menu - - -
START/STOP Select START/STOP
USER SETTINGS
press Enter to confi rm
SERVICE
INFORMATION
- - -Main Menu - - -
START/STOP Select "Stop Directly"
USER SETTINGS
Press Enter to confi rm
SERVICE
INFORMATION
- On/Off Menu -
Select YES and confi rm.
NORMAL START/STOP
STOP DIRECTLY
Aft er few second the value return
to "NO".
Y
ENABLE UNIT RUNNING
IMPORTANT:
STOP
Machine ON: the machine should always work under pressure.
Machine OFF: do not allow air to fl ow into the tanks with the dessicant
when the machine is turned off .
ATT060-090
- - -Main Menu - - -
START/STOP
USER SETTINGS
SERVICE
INFORMATION
- - -Main Menu - - -
START/STOP
USER SETTINGS
SERVICE
INFORMATION
- On/Off Menu -
NORMAL START/STOP
STOP DIRECTLY
FORCING SYSTEM OFF
NO

4.6 Language selection

Select USER SETTINGS
Press Enter to confi rm
Select Language
Press Enter to confi rm
Using UP and DOWN
select the language.
Press Enter to confi rm
4.7 Precautions during commissioning and operation
!
During expansion, the air is expelled from the silencer:
- the unit is performing the step of "generating";
- risk of projection of material (small particles of dust, fragments...) and
noises.
Is required to perform the start-up wearing appropriate personal protec-
tive equipment(see table 1 para.1.4).
!
RISK CAUSED BY SUDDEN DEPRESSURIZATION!
Do not remove components of the dryer or perform other manipula-
tions when the system is under pressure.
Before performing any work on the dryer depressurize the system.
!
DO NOT CHANGE THE DEFAULT OF ELECTRONIC CON-
TROL CARD.
4 / 14
- - -Main Menu - - -
START/STOP
USER SETTINGS
SERVICE
INFORMATION
- User Settings Menu -
DRYER SETTINGS
DATE/TIME
BMS
MOISTURE DRAIN
OTHER
LANGUAGE
LANGUAGE SELECTION
English