Special Accessories; Exploded Drawing And Spare Parts List - Mafell KSP 55 Manual De Instrucciones Original

Defect
Saw blade jams as the machine is
advanced
Burn marks on the cut surfaces
Chip ejection blocked
8

Special accessories

- Rechargeable battery 36 B 94
- Saw blade-TCT Ø 160 x 1.6 x 20, 16 teeth (max. cutting metres for
rechargeable battery)
- Saw blade-TCT 160 x 1.8 x 20, 16 teeth (6 1/4 x 5/64 in. x 20 mm)
(longitudinal cut)
- Saw blade-TCT Ø 160 x 1.8 x 20 (6 1/4 x 5/64 in. x 20 mm), 24 teeth
(longitudinal and crosscuts)
- Saw blade-TCT 160 x 1.7 x 20, 32 teeth (cross cut)
- Guide rail F80, 800 mm (31 1/2 in.) long
- Guide rail F110, 1100 mm (43 5/16 in.) long
- Guide rail F160, 1600 mm (63 in.) long
- Guide rail F210, 2100 mm (82 11/16 in.) long
- Guide rail F310, 3100 mm (122 in.) long
- Sliding bevel segment F-WA
- Accessories for the guide rail:
Screw clamp F-SZ100MM (2 x)
-
Connecting piece F-VS
-
Rail bag F160
-
- Rail bag kit F80/160 with sliding bevel segment consisting of:
F80 + F160 + connecting piece + sliding bevel segment + 2 screw clamps
+ rail bag
- Rail bag
2 x F160 + connecting piece + 2 screw clamps + rail bag
9

Exploded drawing and spare parts list

The corresponding information in respect of spare parts can be found on our homepage: www.mafell.com
Cause
Feed rate too fast
Blunt saw blade
Tension in the workpiece
Poor machine guidance
Uneven workpiece surface
The saw blade used is unsuitable
for the task or blunt
Wood is too damp
Extended operation without
extraction
kit F160/160 consisting of:
-25-
Elimination
Reduce feed speed
Release the switch immediately.
Remove the machine from the
workpiece and replace the saw
blade
Use parallel stop
Straighten the surface
Replace saw blade
Connect to an external extraction,
e.g. portable dust extractor
Order No. 094412
Order No. 092565
Order No. 092539
Order No. 092533
Order No. 092506
Order No. 204380
Order No. 204381
Order No. 204365
Order No. 204382
Order No. 204383
Order No. 205357
Order No. 205399
Order No. 204363
Order No. 204626
Order No. 204749
Order No. 204805