Gree Versati III Manual Del Propietário página 21

No Full Name
1 T-HP max
2 Cool run time
3 Heat run time
2.4.1 Ctrl. state
[Operation Instructions]
At the commissioning parameter setting page, by touching "Ctrl. state", it can be set to "T-water out" or "T-room"
[Notes]
●When "Remote sensor" is set to "With", this setting can be set to "T-water out" or "T-room". When "Remote
sensor" is set to "Without", this setting can only be set to "T-water out".
● This setting will be memorized upon power failure.
Commissioning Parameters Setting
Display Name
T-HP max 40~55℃
Cool run time
Heat run time
Operation Instructions for Versati III
Range
104~131°F 50℃ /122°F
[2-way valve Off]
1~10min
[2-way valve On]
[2-way valve Off]
1~10min
[2-way valve On]
16
Default Remark
3min
5min
3min
5min