Adopting The Correct Posture; Start The Blood Pressure Measurement - Medel CONNECT CARDIO MB10 Instrucciones De Uso

Blood pressure may vary between the right and left arm, which may mean that the measured blood pres-
sure values are different. Always perform the measurement on the same arm. Blood pressure may vary
between the right and left arm, which may mean that the measured blood pressure values are different.
If the values between the two arms are significantly different, please consult your doctor to determine
which arm should be used for the measurement.
Warning
The unit may only be operated with the original cuff. The cuff is suitable for an arm circumference of
22 up to 42 cm.

5.2 Adopting the correct posture

• Before every measurement, relax for about five minutes. Otherwise deviations can occur.
• You can take the measurement while sitting or lying. Always make sure that the cuff is at heart level.
• To take your blood pressure, make sure you are sitting comfortably with your arms and back leaning
on something. Do not cross your legs. Place your feet flat on the ground.
• To avoid falsifying the measurement, it is important to remain still during the measurement and not
to speak.

5.3 Start the blood pressure measurement

1. As described above, attach the cuff and adopt the correct posture.
2. Press the START/STOP button
symbol appears on the display and the cuff inflates. The heart symbol
sync as soon as the device detects a pulse.
100029_MEDEL CONNECT CARDIO MB10_USER MANUAL_REV.00_20.06.2016.indd 68
to start the blood pressure measurement. The blood pressure
68
begins to flash in
23/06/2016 14:35:29