Configuration (Primary Coding) - Vimar Eikon 20557.N Manual Del Instalador

CONNECTIONS
1 2 4 5 6S 6P TV INTERC
Terminal Function
BUS
1
2 BUS
GND
4
5 +12 V Additional
ringtone
(max 40 mA)
6S Additional ringtone
command
6P Bell push
PC
TV Termination Bus line
A = non-terminated
B = 100 Ohm
C = 50 Ohm
INTERC = Connector for
external buttons
PC Connector for PC

CONFIGURATION (PRIMARY CODING)

To be able to receive a call, the Due Fili speakerphone
has to be coded . This coding involves assigning the
device an ID number of between 1 to 200 .
To configure the device correctly, carry out the follow-
ing operations:
• Or unhooking the cover of button "B" (auxiliary func-
tion) (figure 1) .
• Press the configuration button "R" located below the
ringtone volume trimmer (figure 2) .
• Press and hold button "C" (lock) (figure 3) while
releasing button "R" . When the speakerphone emits
a beep to confirm the setting, you can release button
"C" . If no beep is emitted at this stage, repeat the
procedure .
• Once the beep has sounded, the speakerphone has
been coded and now needs to be assigned an ID
number . This number can be set from:
- a Due Fili panel with an alphanumeric keyboard or
individual buttons, sending the call by typing in the
code (alphanumeric keyboard) or by pressing the
19 - ENGLISH