Chicco Pocket lunch Instrucciones De Uso página 21

highchair, referring to the instructions in the paragraph
''Advice for Cleaning and Maintenance'', move the belts
to the required height, passing them through the specific
slots on the backrest (fig. 10) and reposition the lining on
the highchair. The belts must be positioned in the slots at
the same height and not at different heights.
WARNING: It is essential to use the safety belts with the
crotch strap to ensure the child's safety. WARNING: The
tray alone does not ensure the safe retention of the child.
Always use the safety belts!
TRAY POSITIONING/ ADJUSTMENT
Before using the tray, secure the rigid leg divider
underneath. WARNING: IMPORTANT FOR THE CHILD'S
SAFETY – never position the tray on the highchair without
securing first, the rigid leg divider on it. Once assembled,
this must never be removed again.
The tray can be adjusted in 3 different positions.
10. By holding the tray, pull the fastening handles
outwards (fig. 11)
11. Position the tray on the highchair structure, introducing
the arms in to the specific guides (fig. 12)
12. The 3 positions in which the tray can be adjusted
are identified by relative symbols on the highchair arms.
Adjust the tray until reaching the required position and
release the handles. If the tray does not automatically
fasten to the arms, slightly move it until hearing a double
click, for locking. WARNING: Before use, always make
sure that the tray is properly secured to the highchair arms
(fig. 12A)
WARNING: Never leave the tray in a position in which the
hazard marks are visible on the highchair arms: IT IS NOT
SAFE! (see fig. 12B).
13. To remove the tray, pull the two fastening handles
outward and lift it (fig. 13).
ADJUSTING THE BACKREST INCLINATION
The highchair's backrest can be reclined in 3 positions.
14. To adjust the backrest's inclination, push the button
located on the rear downward, recline the backrest until
the desired position and release the button; the backrest
will lock automatically and you will hear a click, for
locking. The operation can also be carried out with the
child sat inside the highchair, but it may be difficult (fig.
14).
FOLDING THE HIGHCHAIR
WARNING: Carry out these operations, paying attention
that your child and any other children are standing at a
safe distance. Make sure that during these operations, the
moving parts of the highchair do not come into contact
with the child's body.
15. After positioning the backrest in vertical position,
grab and pull the two triggers on the side of the highchair
structure upward at the same time, and slightly push the
highchair forward, as shown in figure (fig. 15). Once the
locking mechanism is released, grab the tubular structure
on the rear and rotate it until the highchair is completely
folded, as shown in figure (Fig. 16).
The highchair stands by itself, once folded. The previously
described folding operations can be carried out without
the need to remove the tray and basket from the highchair.
To further reduce the size of the highchair, it is possible to
release the footboard, by rotating it anti-clockwise.
WARNING: When opening the highchair, please remember
to reposition the footboard, referring to paragraph
'Highchair assembly/ opening''.
WARNING: When reopening the highchair, make sure that
the basket does not obstruct the footboard when rotating
the structure.
21