>
E.g.: Consequence 1 in case of failure to observe the hazard
>
E.g.: Consequence 2 in case of failure to observe the hazard
►
This symbol identifies activities/actions that must be observed/carried out in order to avert
the hazard.
4.3 General Safety Instructions
CAUTION
Non-observance of safety instructions
Injury due to damage or malfunction of the product.
►
Follow the safety instructions and the precautions specified in this accompanying document.
CAUTION
Incorrect assembly
Injury due to faulty operation or malfunction of the product.
►
Observe the following sections in these instructions for use.
CAUTION
Improper handling, assembly and disassembly
Injury due to faulty operation or malfunction of the product.
►
Instruct the patient in the proper disassembly, assembly and handling of the product.
INFORMATION
When the protector is installed, the battery charger cable has to point to the upper closure. A
correct knee joint charging process is only ensured with this alignment.
5 Scope of Delivery
Quant
Product
ity
1 pc
Genium Protector
1 pc
Upper Closure
1 pc
Lengthwise Closure
1 pc
Foot Cuff for Genium Protector
1 pc
Instructions for Use (qualified personnel)
1 pc
Instructions for Use (user)
6 Preparation for Use
Required Tools
Designation
Vibrating/band saw
Knife
Loctite® 241 Thread Locking Compound
Crepe Adhesive Tape
Torque Wrench
Tape Measure
12 | Ottobock
Article number
4X880=*
-
-
4P880=*
647G942
646D298
Reference number
-
-
636K13
627B6=15
-
-