Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
depending on the ways in which the tool is used
- avoid vibration risk
suggestion: 1) wear glove during operation
2) limit operating time and shorten trigger time
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp drills.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Keyless chuck with adaptor
6.35mm hex adaptor
SDS drill bits (6mm,8mm)
HSS drill bit (5mm,6mm)
screwdriver bits
2.0Ah Battery pack
80min Charger
We recommend that you purchase your accessories from the same store that sold you the tool. Use
good quality accessories marked with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory packaging for further details. Store personnel
can assist you and offer advice.
COMPONENT LIST
1.
Dust Protection Cap
2.
Tool Holder Locking Sleeve
3.
Function Mode Selection Switch
4.
On/Off Switch (with variable speed control)
5.
Forward And Reverse Rotation Control
6.
Battery Pack
7.
Battery Pack Release Button
8.
LED light
C or less.
o
EN
1
1
2
2
4
1
1
91
Publicidad
Tabla de contenido
