Overheating Protection; Safety Shut-Off; Draining The Cooking Liquid - Gaggenau VK 230 Instrucciones De Uso

Overheating protection

To protect the appliance and the furniture, the steamer
switches the heating element off automatically when
©
overheated. appears on the display. Switch off the
appliance and wait until it has cooled down.
Possible causes for overheating:
▯
appliance was switched on empty (without any
liquid in the cooking basin)
▯
the cooking basin was filled with very hot water
▯
appliance was boiled empty or the liquid in the
cooking basin has dropped below the minimum
level
▯
appliance was operated for a long time on the
steaming setting without the glass cover in place
▯
limescale built-up in the cooking basin

Safety shut-off

For your protection the appliance features safety shut-
off. Every heating operation is switched off after four
hours if the appliance is not operated during this time. If
the temperature setting is below 70°C the heating
operation is switched off after eight hours. Dashes flash
on the display.
Turn the temperature control knob to 0. Then you can
operate the appliance again normally.
10

Draining the cooking liquid

m
Risk of scalding!
Observe caution when draining the steamer, if there is
no fixed drainage connection: let the steamer cool
down. Place a suitable and sufficiently large receptacle
underneath the appliance to collect the water.
Note: Install the drain installation set AG 060 000 if
there is no fixed drainage connection present. Place a
suitable, heat resistant receptacle (min. 10 l) under the
drain tap.
Opening the drain valve
1 Turn the temperature control knob to the left to the
¤
position .
2 Turn the timer control knob to the left to the
¤
position and hold it in this position.
¤
A signal is sounded.
few seconds. The drain valve is opened.
permanently on the display while the drain valve is open.
Closing the drain valve
1 Turn the temperature control knob to the right to the
position 0.
2 A signal is sounded.
a few seconds. The drain valve is closed. When the
drain valve is closed, the symbol
Notes
‒ If the drain valve is not properly open or closed,
flashes on the display.
‒ Make sure the residue strainer is placed on the
drain to avoid food residues blocking the drain.
flashes on the display after a
¤
lights
¤
flashes on the display after
¤
goes off.
¤