Wall Mounting - Silvercrest STS 12 A1 Instrucciones De Uso

♦ Place the appliance on a fi rm and fl at surface so that it is stable
and secure. To help prevent it from tipping over, you can secure
the stand 5 with the adhesive strips.
GB
CAUTION - PROPERTY DAMAGE
MT
► Do not use the adhesive strips to hang the appliance on
a wall! The appliance may fall down and be irreparably
damaged!
Align the light surface 1 so that the fl icker is visible on the
♦
walls and/or ceiling
Connect the power adapter 2 with the appliance by inserting
♦
the barrel connector 3 into the plug socket 4 at the rear side
of the appliance.
Connect the power adapter 2 into a power socket.
♦
NOTE
► It is best to check the location and alignment of the appliance
in the dark from outdoors and through the window. Only in
this way can you assess whether the appliance is aligned so
that it appears as if someone is watching television inside.
If necessary, realign the appliance.

Wall mounting

RISK OF ELECTRIC SHOCK!
Ensure that there are no power cables or other conduits or
pipes in the wall at the location where you intend to bore the
holes for the wall holder. It would be a potentially fatal risk to
bore into a current carrying electric cable!
22
STS 12 A1