Introduction; Caution; Warning; Information - Elledi RODI STEEL Manual De Uso Y Mantenimiento

Introduction

Caution

It is recommended to carefully read this manual describing all the necessary operations to properly operate the thermo-stove.

Warning:

The installation and operation rules contained in this manual may differ from the local regulations. In this case, always follow the local
competent authorities' directions. The drawings contained in this manual are indicative and not in scale.

Information:

The packaging used offers good protection against damage as a result of transport. In any case, check your thermo-stove immediately
after delivery and, in case of any visual damage, immediately inform your Elledi reseller.

Use and maintenance manual description:

Through this use and maintenance manual, Elledi is supplying the user with all information necessary to safely use the thermo-stove
and thus avoid any damage to property, people, or parts of the thermo-stove itself.
P
lease carefully read this manual before using the Product and Performing any oPeration on it

Warnings

The Elledi stoves are manufactured paying careful attention to each individual component, in order to protect both the user and the installer
from the danger related to possible accidents. It is recommended for authorised personnel to pay careful attention to electrical connections
after each intervention on the product.
Installation must be completed by authorised personnel, who must give the purchaser a system conformity declaration, taking
full responsibility for the final installation and resulting proper operation of the product installed. Both during installation and
use, all national, regional, provincial and municipal laws and regulations in force in the Country where the equipment is installed
must be taken into account. There shall be no liability on the part of if these precautions are not followed.
This manual is an integral part of the product: make sure that it is always supplied with the thermo-stove, even if it is sold to a different
owner or user, or transferred to a different place. Should the manual be damaged or lost, request a copy from technical service. This
thermo-stove must be destined to the use it was specifically designed for. The appliance must not be used as an incinerator or differently
from its purpose. Any contractual and non-contractual liability of the manufacturer is excluded for damages to persons, animals or property
due to installation and maintenance adjustment errors and improper use. No fuel outside of pellet must be used. Do not use liquid fuels.
After removing the packaging, ensure integrity and completeness of the content. All of the thermo-stove electrical components must be
exclusively replaced by an authorised Technical Support Centre using original parts. The thermo-stove must be serviced at least once
a year, and maintenance work scheduled ahead of time with the technical support service. Do not make any unauthorised changes
to the appliance.
For safety reasons, it is important to remember that:
-
The appliance is not intended to be used by people (including children) with reduced physical, sensory or mental capacity or by
people with no experience or knowledge, unless they are supervised or properly instructed by a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance
-
Touching the thermo-stove with bare feet and wet parts of the body is not recommended;
-
Modifying safety or adjustment devices without authorisation or instructions on the part of Aico S.p.A. is prohibited
-
Installing the equipment in small rooms, bedrooms, potentially explosive environments, etc. is prohibited
-
Pouring pellet directly into the brazier before switch-on is prohibited;
-
before connecting the equipment, make sure that the water mains pressure does not exceed 2 bar;
-
The equipment works exclusively with wood pellets, so do not fuel the thermo-stove with a different fuel.
-
During the first ignition it is normal for the product to emit smoke / bad odour due to thermal stabilisation of the paints.
Keep the installation area well ventilated for a few days or until the odour is gone.
The installer shall inform the user that:
1. In the case of water spills, water supply must be closed and the technical service promptly alerted.
2. The system operating pressure must be periodically checked. If the thermo-stove is not used for a long
advisable to contact technical support to perform the following operations:
-
Close the taps of both the thermal and sanitary systems;
-
Empty the thermal and sanitary systems if there is a risk of frost.
When the thermo-stove is running, it may reach high touch temperatures, especially on its external surfaces: pay attention in order to avoid
burns.
The thermo-stove was designed to operate under any climactic condition. In case of particularly harsh conditions (wind, frost),
safety systems stopping the thermo-stove operation may be triggered.
If that should occur, contact technical after-sales service and, in any case, do not disable safety systems.
A -
ll of our thermo stoves Are tested
15
time thAt goes from
brAzier And in the combustion
And operAtionAl test At the end of the production line
theY show the Added quAlitY thAt
Model Rodi Steel Use and Maintenance Manual
(
turned on
20 . t
to minutes rAces of pellet
chAmber Are normAl
e
lledi Applies to the production process
)
A the end of the production line for A vAriAble Amount of
, ,
pellet dust Ashes And
And indicAte thAt
. theY do not indicAte thAt the stove is used
.
/
or signs of combustion in the
the mAchine hAs pAssed
Rev.2 31/07/2017
Page48
.
period of time, it is
All quAlitAtive
but