Troubleshooting - EGO STA1500 Manual Del Operador

TROUBLESHOOTING

PROBLEM
String trimmer fails
to start.
String trimmer
stops while cutting.
CAUSE
◾ ◾
The battery pack is not
attached to the power
head.
◾ ◾
No electrical contact
between the power head
and the battery pack.
◾ ◾
The battery pack is
depleted.
◾ ◾
The lock-off lever and
trigger are not depressed
simultaneously.
◾ ◾
The guard is not mounted
on the trimmer, resulting in
an overly long cutting line
and motor overload.
◾ ◾
Heavy cutting line is used.
◾ ◾
The motor shaft or trimmer
head is bound with grass.
◾ ◾
The motor is overloaded.
◾ ◾
The battery pack or string
trimmer is too hot.
◾ ◾
The battery pack is
disconnected from the tool.
◾ ◾
The battery pack is
depleted.
STRING TRIMMER ATTACHMENT—STA1500
SOLUTION
◾ ◾
Attach the battery pack to the power
head.
◾ ◾
Remove battery, check contacts
and reinstall the battery pack until it
snaps into place.
◾ ◾
Charge the battery pack with EGO
chargers listed in this manual.
◾ ◾
Press the lock-off lever and hold it,
then depress the trigger to turn on
the string trimmer.
◾ ◾
Remove the battery pack and mount
the guard on the trimmer.
◾ ◾
Use recommended nylon cutting line
with diameter no greater than
0.095 in. (2.4 mm).
◾ ◾
Stop the trimmer, remove the
battery, and remove the grass from
the motor shaft and trimmer head.
◾ ◾
Remove the trimmer head from the
grass. The motor will recover as
soon as the load is removed. When
cutting, move the trimmer head in
and out of the grass to be cut and
remove no more than 8 inches of
length in a single cut.
◾ ◾
Allow the battery pack or trimmer
to cool until the temperature drops
below 152°F (67°C).
◾ ◾
Re-install the battery pack.
◾ ◾
Charge the battery pack with EGO
chargers listed in this manual.
29