Konic KWC 602 Manual De Instrucciones página 20

English
Cleaning and care
Caution
• Warning! Never immerse electrical parts
of the product in water during cleaning or
operation. Never hold the product under
running water.
• Warning! When cleaning, never use
solvents or abrasive materials, hard
brushes, metallic or sharp objects.
Solvents are harmful to human health and
can attack plastic parts, while abrasive
cleaning mechanisms and tools may
scratch the surface(s).
Cleaning spray bottle/ extension tube
Open the spray bottle and empty contents.
13
Remove the microfibre cover. Wipe the
components of the spray bottle with a
damp cloth; if necessary, use a little mild
detergent on the cloth.
Troubleshooting
If there are any problems during operation, please refer to the following table. If problems cannot
be solved as indicated under Solution, please contact your manufacturer.
Problem
Product does not function
Weak suction power
Water cannot be sucted
and rinse off the side of
the blade.
Water is leaking from the
ventilation port and dirt
water freeing port
20
IM_KWC602_151222_V05_HR.indb 20
Note:
The microfibre cover can be machine-washed
at 60°C. Do not use any fabric conditioner as
this significantly reduces the cleaning power
of the microfibres.
Cleaning main unit
To clean thoroughly, disassemble the product:
Press and hold the unlock button and pull
14
out the vacuum attachment from the
connecting piece. Clean the attachment
with a damp cloth.
Press on both unlock buttons and remove
15
the connecting piece from the motor block.
Clean the connecting piece and motor block
with a damp cloth. If required, use some mild
detergent.
Re-assemble all removed components.
Assembly is carried out in reverse order, please
follow the steps in chapter Assembly.
Possible causes
• No Power supply
• Battery empty
• Low battery
• Blade was drag sideways
across wet areas
• Use the foaming/spirits cleaner
• Water tank reservoir exceed
the Max level
Solution
• Ensure power supply
• Charging battery
• Charging battery
• Move the blade from top
to bottom across the wet
areas
• Use non-foaming/spirits
cleanser
• Empty the dirt water tank
22/12/15 3:05 PM