Using The Cooler; Cleaning And Maintenance - Dometic BordBar AS25 Instrucciones De Uso

Cleaning and maintenance

6.2

Using the cooler

➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable (fig. 2 1, page 3) into the cigarette
lighter socket or a 12 V socket in the vehicle
or
➤ Plug the 230 V connection cable (fig. 2 2, page 3) into the AC voltage
socket and connect it to the 230 Vw mains supply.
NOTE
I
Close the box tightly by pushing down the lid.
✓ The cooler starts cooling the interior.
➤ When operating at the AC mains supply: Push the ECO cooling
capacity control (fig. 1 2, page 3) to the desired position.
➤ To switch off the cooler, disconnect the plug.
6.3 Connecting to a cigarette lighter
NOTE
I
If you connect the device to the cigarette lighter of your vehicle,
remember that the ignition must be turned on to supply the device
with power.
7 Cleaning and maintenance
WARNING!
!
Always disconnect the device from the mains before you clean and
service it.
NOTICE! Risk of damage
A
 Never clean the cooler under running water or in dish water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
22
BordBar AS25
EN