2. Disconnect two connectors
({_}) at
each side of the top cap and the one
connector(@)
on left side door.
Remove
the tube (l_}) with pressing the dark gray
color part (_}) of the water line coupler.
Z_
If a red clip is on the coupler, it must be removed
CAUTION before removing the tube.
3. Remove the three hex head bolts(_})
attached
to the upper left and right door hinges with a
Wrench(10mm).
With a Philips head screwdriver,
remove the ground
screw(G
) attached
to the upper left and right door
hinges.
Remove the upper left and right door hinges(G
) .
%
4. Lift the door straight up to remove.
5. With a Philips
head screwdriver,
remove the two
screws(_)
attached
to the lower left and right
door hinges.
With an Allen Wrench(3/16"),
remove the two hex
head bolts([_})
attached
to the lower left and right
door hinges.
Remove
the lower left and right door hinges([_).
@
10 settng up