Sears Craftsman WEEDWACKER 316.74082 Serie Manual Del Operador página 9

INSTALLING AND ADJUSTING THE HANDLE
Installing the Handle
1. Push the handle down onto the upper shaft housing (Fig. 5 or
Fig. 6). Make sure the bolt hole faces to the right (Fig. 5 or Fig. 6).
2. Insert the bolt into the bolt hole and push it through (Fig. 5 or
Fig. 6). Tighten the bolt with a flat-head screwdriver, but do not
tighten the bolt completely .
3. Hold the unit in the operating position (Fig. 13). Move the handle
up or down the upper shaft housing to a comfortable location
(Fig. 5 or Fig. 6). Make sure the handle is positioned beyond the
end of the safety label (Fig. 5 or Fig. 6).
4. Tighten the bolt with a flat-head screwdriver until the handle is
secure.
Adjusting the Handle
If the handle requires adjustment:
1. Loosen the bolt with a flat-head screwdriver (Fig. 5 or Fig. 6).
2. Hold the unit in the operating position (Fig. 13). Move the handle
up or down the upper shaft housing to a comfortable location
(Fig. 5 or Fig. 6). Make sure the handle is positioned beyond the
end of the safety label (Fig. 5 or Fig. 6).
3. Tighten the bolt with a flat-head screwdriver until the handle is
secure.
316.74082*
Safety Label
Bolt Hole
Bolt
316.74089*
Safety Label
Bolt Hole
Bolt
9
Handle
Upper Shaft
Housing
Fig. 5
Handle
Upper Shaft
Housing
Fig. 6