Die Heads And Dies; Machine Assembly; Mounting Machine To Stand - RIDGID 535 Manual Del Usuario

535 Automatic Pipe and Bolt Threading Machine

Die Heads and Dies

Model
811A NPT
815A NPT
842 NPT
816 NPT
817 NPT
811A BSPT
815A BSPT
531 Bolt
532 Bolt
Universal Pipe Die
(Catalog Numbers)
H.S. R.H.
H.S. L.H.
H.S. for S.S. R.H.
H.S. for C.I. R.H.
H.S. for PVC R.H.
H.S. for Coated R.H.
Universal Pipe Die
(Catalog Numbers)
H.S. R.H.
H.S. L.H.
H.S. for S.S. R.H.
H.S. for S.S. L.H.
H.S. for PVC R.H.
H.S. for Coated R.H.
Note: BSPT and BSPP Dies require a British Model Die Head
Note: L.H. operation of the 1822-I requires special set up
Note: High Speed Dies are recommended for threading 1" - 2" pipe at 45 RPM
Universal Bolt Dies for 811A and 815A Die Heads
Over 90 sets available from
Right Hand only in UNC, UNF and BSW thread forms.

Machine Assembly

WARNING
To prevent serious injury, proper assembly of the
Threading Machine is required. The following pro-
cedures should be followed:

Mounting Machine To Stand

1. The machine is designed to mount on the three uni-
versal stands listed.
Pipe Bolt
Capacity Capacity
1 / " - 2" 1 / " - 2"
8 4
1 / " - 2" 1 / " - 2"
8 4
1 / " - 2" —
4
1 / " - 3 / " —
8 4
1" - 2" 1 / " - 2"
4
1 / " - 2" 1 / " - 2"
8 4
1 / " - 2" 1 / " - 2"
8 4
— 1 / " - 1"
4
— 1 1 / " - 2"
8
NPT
1 / 1 / " - 3 /
" "
8 4 8
47755 47760
— 47810
47775 47780
— —
— —
— —
BSPT
1 / 1 / " - 3 / 1
" "
8 4 8
66750 66755
—
66840
66770 66775
— 66855
— —
— —
1 / " to 2", Alloy or High Speed.
4
Ridge Tool Company
Dies
Universal
Universal
Universal
Universal
Universal
Universal
Universal
500B
500B
1 / " - 3 / 1" - 2" 1 /
"
2 4 8
47765 47770 47845
47815 47820 —
47785 47790 —
— 70740 —
70745 70750 —
— 31822 —
/ " - 3 / 1" - 2" 1 /
"
2 4 8
66760 66765 66795
—
66845 66850
66780 66785 66815
66860 66865 —
70755 70760 —
— 31837 —
500B Bolt Dies for 531 and 532 Die Heads
Over 200 sets for the 531 Bolt Die Head
Over 150 sets for the 532 Bolt Die Head
Mono Dies for Mono (A Series) Die Heads
Machine Stands
Model No. Cat. No.
100A
150A
200A
Figure 3
2. Parts diagram and parts list for the stands are includ-
ed in the 535 Automatic Parts List.
3. Assemble stand with "inside" decals located towards
the inside of the stand (Figure 4).
4. Insert stand stop tabs into bottom of the legs as
shown in the detail drawing. Use the four (4)
x 2 1 / " hex bolts to secure the legs to the cross-mem-
2
ber. Adjust the two halves of the stand stop to the
proper distance to fit into the rear legs on the stand.
The stand stop bracket is not required or supplied with
the No. 100 Leg and Tray Stand.
Opening Operation
Quick
Self
Quick
TAP
TAP
Quick
Self
Quick R.H./L.H.
Quick R.H./L.H.
NPSM
1 / " - 3 / 1 / " - 3 /
" " "
4 8 2 4
47850 47855
— —
— —
— —
— —
— —
BSPP
1 / " - 3 / 1 / " - 3 /
" " "
4 8 2 4
66800 66805
—
66870
66820 66825
— —
— 70765
— —
Description
92457 Universal Leg & Tray Stand
92467 Universal Wheel & Tray Stand
92462 Universal Wheel & Cabinet Stand
R.H.
R.H.
L.H.
R.H.
R.H.
R.H.
R.H.
1" - 2"
47860
70775
—
—
—
—
1" - 2"
66810
66875
66830
—
70770
—
3 / " - 16
8
5