● Lift basic unit (A) with the help of a
second person.
● Place cover (N) and coupler (M) on
drive shaft (1).
● Tighten the locking screw on
coupler (M).
0478 404 9603 A - EN
The hoe is marked with a sticker
(R - right).
● Assemble hoe (B1) using screw (U11),
washer (V5), spring washer (V8) and
nut (W3).
● Position hoe (B1) so that the bores in
the shaft mount and the drive shaft
align.
● Push hoe (B1) onto the drive shaft.
● Insert folding retainer (L) through the
bore and close the securing clip.
7.3 Installing the left hoe
Risk of injury!
Hoes and running wheels must
always be installed in pairs. Never
install a hoe on one side and a
running wheel on the other side.
Strictly observe the installation
instructions. In particular, observe
the installation sequence and install
the hoe and folding retainer
completely as described. When
installing the folding retainer, strictly
observe the correct direction of
insertion and positioning of the
securing clip, as shown. In the case
of incorrect or rotated installation,
the folding retainer may come loose
and be lost.
For good working results, the
cutting edges of the hoes must
point forwards (not towards the
handlebar) – observe markings.
59