Installing The Running Wheels; On/Off Switch; Throttle Lever - Stihl MH 700 Manual De Instrucciones

Engine oil in oil bath air filter:
Please consult the engine
instruction manual for the type of
engine oil to be used and the oil capacity.
Check the oil filling level at regular
intervals (see engine instruction manual).
Avoid exceeding or falling below the
correct oil level.
Screw on the oil bath air filter cap properly
before operating the engine.

7.19 Installing the running wheels

The running wheels are assembled
in the same way for both wheels.
0478 404 9603 A - EN
● Install axle mount (T) on running
wheel (S) using bolts (U9),
washers (V2), spring washers (V7) and
nuts (W2).
8. Controls

8.1 On/Off switch

The On/Off (1) switch has the following
functions:
1 Switching on:
The On/Off switch (1) serves as the main
switch when starting the engine. The
engine cannot be started if the On/Off
switch (1) is not turned to 1.
2 Switching off:
The engine switches off if the On/Off
switch (1) is turned to 0.

8.2 Throttle lever

The engine speed can be controlled via
the throttle lever.
Engine speed control:
● Adjust throttle lever (1) when the engine
is running.
Engine speed:
Fast
Slow
67