Maintenance; Product Service; Specifications - Panasonic RP-WH5000 Instrucciones De Funcionamiento

Troubleshooting guide
Problem Possible cause and suggested remedy
You have set the transmitter's SURROUND button to "OFF" (
The DOLBY PRO
13).
LOGIC II lamp does
not light.
There are no analog input signals, digital input signals (PCM) or Dolby
Digital 2-channel signals being input.
The DOLBY PRO
There are analog input signals, digital input signals (PCM) or Dolby Digital
LOGIC II lamp lights
2-channel signals being input.
You have selected "OFF" for the DVD player's DTS digital output setting
The DTS lamp
does not light.
( page 10).
• Set the DVD player's DTS digital output setting to "ON".
You are playing a signal that is not recorded in DTS format.
The chapter being played is not DTS format.
The DVD player is not DTS compatible (
• Use a DTS compatible DVD player.
Cannot charge The POWER/CHARGE lamp on the transmitter is not on (
• Check that the headphones are put on the transmitter correctly.
Dry cell batteries are inserted (
• Insert the supplied nickel-metal hydride rechargeable batteries.
Nickel-metal hydride rechargeable batteries other than those supplied are
inserted.
• Insert the supplied nickel-metal hydride rechargeable batteries or nickel-
metal hydride rechargeable batteries with the same product number
( page 7).
A noise signal is being received from the connected equipment.
Infra-red
• Turn off the power on the connected equipment.
ray output does not
stop.
18
18
page
page 10).
page 8).
page 9).

Maintenance

To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner, or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that came with the cloth carefully.

Product service

Do not attempt to remove the cover(s) or repair the unit yourself. Refer servicing to qualified personnel
only.
Product information
For product service, product information or assistance with product operation, refer to the servicenter
directory.

Specifications

Transmitter (RP-WH5000T)
Decoder function
Dolby Digital
Dolby Pro Logic II
MPEG-2 AAC
Surround function
CINEMA
MUSIC
VOICE
Modulation system
Digital infrared transmission
Transmitting frequency
3.75 MHz
Transmitting distance
8 m (26 ft.) (approx.)
Frequency response
18 Hz – 22,000 Hz
Distortion factor
Less than 0.1% (1 kHz)
Audio input
Optical digital input (TOS Link type) x1
Analog input (RCA type, left/right) x1
Power supply
DC 6 V (using AC adapter, included)
Dimensions (WxHxD)
147 mm x197 mm x147 mm
(5–13/16 in. x 7–3/4 in. x 5–13/16 in.)
Mass 334 g (11.8 oz.) (approx.)
Headphones (RP-WH5000H)
Frequency response
18 Hz – 22,000 Hz
Power supply
DTS Supplied rechargeable nickel-metal hydride
batteries or commercially available (size AA)
OFF Mass
312 g (11.0 oz.) (approx.), including supplied
rechargeable nickel-metal hydride batteries
AC Adapter (RFX5176)
Input
AC 110-240 V, 50/60 Hz
Output
Power consumption
Power consumption of the AC adapter in
standby mode
(when connected to the transmitter)
approx. 1.3 W
NOTE
Specifications are subject to change without notice.
Mass and dimensions are approximate.
batteries
DC 6 V, 1 A
10 W
19
19