Tabla De Contenido; Description; Safety; Purpose Of This Manual - Greenlee Gator LS50L2 Manual De Instrucciones

Ocultar thumbs Ver también para Gator LS50L2:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Important Safety Information ..................................... 3-5
Identification and Illustration .......................................... 6
Specifications ................................................................. 6
Setup and Operation .................................................. 7-8
Capacity ......................................................................... 9
Maintenance ................................................................. 10
Troubleshooting ............................................................ 11

Description

The Greenlee LS50L2 Battery-Hydraulic Knockout Driver
is a hand-held, self-contained knockout driver intended
to be used with Greenlee punches, dies, and drawstuds
for punching holes through mild steel, stainless steel,
brass, copper, aluminum, fiberglass, and plastics.
The LS50L2 is designed to be used with the following
Greenlee accessories:
• Standard punches, dies, and drawstuds
• Slug-Buster
punches, dies, and drawstuds
®
• Slug-Splitter
punches, dies, and drawstuds
®
• SPEED PUNCH
Knockout System
®
• Electronic connector panel punches
• Special shape punches, dies, and drawstuds
("D", Double "D", Key, Square, Rectangular, and
Oiltight with notches)
Standard and Slug-Buster, Electronic Connector Panel
Punches, and special shape punches can punch holes
through mild steel, brass, copper, aluminum, fiberglass,
and plastics, with limited stainless steel capability.
Slug-Splitter punches, dies, and drawstuds are capable
of punching through all of these materials and are
optimized for stainless steel. Refer to the "Capacity"
section in this manual for detailed information on
maximum driver rating. Do not exceed the rated
capacity of the punch or driver.
This tool is protected by U.S. Patent No. 6,276,
186, 6,401,515, 7,086,979, and 7,254,982 and
patents pending.
Greenlee Tools, Inc.

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.

Purpose of this Manual

This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
Keep this manual available to all personnel.
Replacement manuals are available upon request at
no charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Tools, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
GATOR, Kwik-Stepper, Slug-Buster, Slug-Splitter and SPEED PUNCH
are registered trademarks of Greenlee Tools, Inc.
KEEP THIS MANUAL
2
LS50L2 Knockout Driver
LS50L2 Battery-Hydraulic Knockout Driver
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

Publicidad

Tabla de contenido
loading

Tabla de contenido