Publicidad
Idiomas disponibles
Idiomas disponibles
Fig # 7
Control
Timer start or Timer stop mode is used to pre-start or shut off your unit in
advance. You can program this up to ! 2 hours in advance. You can use
the Timer in 3 Functions i.e. A/C,
Dehumid. or Fan OnJy
eTimer Start. (See Fig. # 7)
Unit must be on to set the timer. Unit will shut down automatically
after it
accepts the settings in 5 seconds Use this mode to presser the start time of
the unit ] 2 hours in advance.
a! Press Start, LED dispHay wilH show "XX" (time set Hasttime) when power
is connected first time, LED display wiHI show "01"
b) Set desired number of hours by pressing the (+) pad of the Temp/Time
buttons, one for each hour. Hfyou passed the desired time use the H pad
key to lower the selection.
,_Timer Stop (See Fig # 7}
Unit must be running to set the timer off. Use this to preset the time you
would Hikethe unit to shut off.
a) Press Stop, LED dispHay will show "XX" (time set Hasttime) when power
is connected first time, LED display wiHI show "01"
b) Set desired number by pressing the (+) pad of the Temp/Time buttons.
One for each hour. If you passed the desired time, use the (-) pad key to
lower the selection.
When using the timer the unit wiHJuse!revert
to the last A/C and fan
settings when activated. The timer must be reset every time you choose to
use it.
PQ_e_
Q Q
d
SPEED
iiii
FUNCT_eN
Pressingthe mode one time, the settingof Timer start, Timer stop and sleep
can be done. Pressingthe mode For a second time, the setting is canceHHed.
12
Publicidad
