Maytag Epic Z Manual De Uso Y Cuidado página 18

This dryer can be converted to exhaust out the right side, left side, or through the bottom.
Contact your local dealer to have the dryer converted.
Special provisions for mobile home installations
The exhaust vent must be securely fastened to a noncombustible portion of the mobile home
structure and must not terminate beneath the mobile home. Terminate the exhaust vent
outside.
B
A. Standard rear offset exhaust installation
B. Zeft or right side' exhaust installation
C. Bottom exhaust installation (not an option with
ped_'stal installations)
Alternate installations for close clearances
Venting systems come ill many varieties• Select the type best for your installation. Two close-
clearance installations are shown. Refer to the manufacturer's instructions.
i _==_-
\d
aL_[. =---_
V,';'"
ill;
\\ I
A B
A. Over-the-top installation (also available" with one
offset elbow)
B. P_'ri_cope installadon
NOTE: The following kits for close clearance alternate installations are available for purchase.
Please see the "Assistance or Service" section to order.
• Over-the-Top Installation:
Part Number 4"¢96028
• Periscope Installation (For use with dryer vent to wall vent mismatch):
Part Number 4";960"¢7 - 0" (0 cm) to 18" (45.72 cm) mismatch
Part Number 4";9601 I - 18" (45•72 cm) to 29" (7"L66 cm) mismatch
Part Number 4";96014 - 29" (73•66 cm) to 50" (127 cm) mismatch
Determine vent path
• Select the route that will provide the straightest and most direct path outdoors.
• Plan the installation to use the fewest number of elbows and turns•
• When using elbows or making turns, allow as much room as possible.
• Bend vent gradually to avoid kinking.
• Use the fewest 90 ° turns possible.
Determine vent length and elbows needed for best drying performance
• Use the following Vent system chart to determine type of vent material and hood
combinations acceptable to use.
NOTE: Do not use vent runs longer than those specified in the Vent system chart. Exhaust
systems longer than those specified will:
• Shorten the life of the dryer.
• Reduce performance, resulting in longer drying times and increased energy usage.
The Vent system chart provides venting requirements that will help to achieve the best drying
performance.
18