Remote Control; Before Operation - Aiwa XR-MR5 Manual De Instrucciones

REMOTE CONTROL

Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R03 (size AAA) batteries.
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries with
new ones.
To use the remote control
• Buttons on the remote control with the same names as those on
the main unit can be used instead. There are operations
performed by both the main unit and the remote control, but
there are operations performed by the remote control only.
Read this manual for each operation and the buttons that can be
used.
• The numbered buttons from 2 to 0 and +10 on the remote control
have two different functions. To use the function on the button,
simply press the button. To use the function on the plate above
the button, press the button while pressing SHIFT.
SHIFT
NOTE
• If the unit is not going to be used for an extended period of time,
remove the batteries to prevent possible electrolyte leakage.
• The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
6
ENGLISH
R03 (AAA)
2-0, +10

BEFORE OPERATION

POWER
ENTER/
ILLUMINATION
TUNER,
AUX/D-IN,
CD, CD-R/RW
PHONES
To turn the unit on
Press one of the following buttons.
POWER:
The unit is turned on and enters the previously selected function
mode.
TUNER:
The unit is turned on and tuned in to the previously received radio
station.
CD:
The unit is turned on and the disc loaded in the CD player begins
to play.
CD-R/RW:
The unit is turned on and the disc loaded in the CD-R/RW player/
recorder begins to play.
Pressing AUX/D-IN also turns the unit on.
To turn the unit off
Press POWER again.
Turning on/off the illumination
The unit has an illumination light above the rotary panel.
The illumination light can be turned on in one of the three different
colors.
While the power is on, press ENTER/ILLUMINATION on the main
unit or ENTER on the remote control.
This turns on/off the illumination and changes its color in the
following order:
1 Turns on in blue
2 Turns on in orange
3 Turns on in purple
4 Turns off
NOTE
• The above operation is not possible when ENTER/
ILLUMINATION (or ENTER) is used as the ENTER button, i.e.
when setting the clock, etc.
• Turning on/off the illumination light is not possible during the
demo display or when the display brightness is set to "DIMMER
3" (page 7).
Using headphones
Connect headphones with a stereo mini plug (ø3.5 mm,
to the PHONES jack .
No sound is heard from the speakers while the headphones are
plugged in.
TUNER,
AUX/D-IN,
CD, CD-R/RW
POWER
ENTER
1 / inch)
8