Key Functions; Safety Tether Key; Console - Tunturi T10 Manual Del Usuario

POWER CORD AND GROUNDING
INSTRUCTIONS
Plug the socket end of the power cord into the
treadmill at the left front corner. Before connecting
the device to a power source, make sure that local
voltage matches that indicated on the type plate. The
treadmill operates at 110 V or 230 V.
This treadmill must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to reduce
the risk of electrical shock. This product is equipped
with a cord having an equipment-grounded conductor
and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed
and grounded in accordance with all local codes
and ordinances. Do not use extension cables when
connecting the equipment to the power source.
Improper connection of the equipment-
DANGER!
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or
serviceman, if you are in doubt as to whether the
product is properly grounded. Do not modify the
plug provided with the product - if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.

SAFETY TETHER KEY

The treadmill cannot be used if the tether key
is not properly installed on the console; if the
key is removed from its place, the treadmill will
immediately stop. Place the safety tether key in its
place on the console. Ensure that the clip of the safety
tether key is properly attached to your clothing; as
the cord tightens, make sure the clip does not detach
itself from your clothing before the safety tether key
disconnects from the console.

CONSOLE

4

KEY FUNCTIONS

A. SAFETY KEY:
The monitor and the treadmill can be operated only
with the key attached on the SAFETY KEY ON
button and both of the monitor and the treadmill stop
as soon as the key is removed. Do not exercise, please
attach the Safety Key on the OFF position.
B. MAJOR FUNCTION KEYS:
1. ELEVATION +:
Press this button to choose the program form
a.
P1, P2, P3, P4, P5, P6,P7, U1 andU2.
During the setting mode, press this button to
b.
increase the setting value.
During the exercise mode, increases the
c.
elevation level in the range from 0% to 12%.
Pressing once increases 1 % and to speed up
the decrement by pressing and holding it for
2 seconds.
2. ELEVATION –:
Press this button to choose the program form
a.
P1, U2, U1, P6, P5, P4, P3, and P2.
During the setting mode, press this button to
b.
decrease the setting value.
During the exercise mode, decreases the
c.
elevation level in the range from 0%-12%
–11% to 0% . Pressing once decreases 1%
and to speed up the decrement by pressing
and holding it for 2 seconds.
Press this button to turn on or turn off
3. POWER:
the power.
Starts or stops the program.
4. START/STOP:
5. SCAN/SELECT:
Select: During the exercise stage, press this
a.
button to scan the function of Distance,
calories, heart rate and elevation. (LED light
will not glitter)
During the exercise stage, press this
b. SCAN:
button for 5 seconds to scan the function of
the Distance or kcal or heart rate or elevation
function automatically (LED light will
glitter.)
6. ENTER/RESET:
Press this button to confirm your desired
a.
program or setting value.
Hold two seconds to reset all of the value to
b.
initial mode.
7. SPEED +:
Press this button to choose the program form
a.
P1, P2, P3, P4, P5, P6, P7, U1 andU2.
During the setting mode, press this button to
b.
increase the setting value.
During the exercise mode, increases the
c.
speed level in the range from 0.8to 16.0 KPH
or 0.5 MPH to 10 MPH shown in the SPEED
Display. Pressing once increases 0.1 KPH
or 0.1 MPH. To speed up the increment, hold
this button more than 2 seconds.
8. SPEED –:
Press this button to choose the program from
a.
P1, U2, U1,P7, P6, P5, P4, P3, and P2.
During the setting mode, press this button to
b.
decrease the setting value.
During the exercise mode, decreases the
c.
speed level in the range from 0.8 to 16.0
KPH or 0.5MPH to 10MPH shown in the
SPEED Display. Pressing once decreases
0.1 KPH or 0.1 MPH. To speed up the