• This product is ONLY for HOME INDOOR use only. Recycle it into electronic devices waste,
not into domestic waste.
9.2. Battery Pack Warnings
• This controller works ONLY with the battery pack LI-ON 3.7V/800mAh included.
EN
• Do not use the battery if it appears to be damaged or leaking, showing discoloration,
shape or any other changes.
• If battery leakage occurs avoid contact with skin, cloths, wipe off any deposit and install
new batteries (only authorized Ardistel serviceable parts). If contact occurs, immediately
wash thoroughly and check with a doctor.
• Do no use unauthorized chargers (USB Chargers, Car charger, AC Chargers, etc.). Charge
the battery pack included following the instructions given at section 4 of this manual.
• Do not short-circuit the battery terminals.
• Unplug the USB-mini USB cable from the controller when the charging process is finish.
• Do not throw the battery into water or fire.
• Do not disassemble or attempt to repair the device or its components. There are no
serviceable parts inside. Changes or modifications not approved by Ardistel will avoid the
user warranty.
• Please, keep the device and its components away from children. Children must be ALWAYS
under adult supervision. Only adults can install and charge the battery.
• Make sure you keep the battery pack in a safe place, clean and dry, away from liquids, dust
and dirty. Do not expose it to extreme weather conditions (heat and cold) or extreme
fluctuations in air moisture.
• This product is ONLY for HOME INDOOR use only. Recycle it accordingly, not into domestic
waste.
10. TROUBLESHOOTING (FAQ)
10.1. The controller does not work
• Make sure the battery is installed correctly.
• Check that the energy level from the battery pack is enough and re-charge it if the level is
too low.
• Check that the controller did not go into Sleep function (See section 7).
10.2. The controller does not work properly
• Check that the energy level from the battery pack is enough. A low level may cause
anomalous functioning in the controller.
• Make sure you have not activated the Turbo function. Turn off your controller to deactivate
it (see section 5 of this manual).
• Make sure you have not activated the "Switch Pro Shooter" function, to deactivate it see
section 6 of this manual.
10.3. The vibration does not work
• Check to see whether the game you're playing supports vibration. Turn on the vibration
function in the XMB® menu, if necessary. This option is in "Settings," then "Accessory
Settings," then "Controller Vibration Function."
• Enable vibration in the game you're playing. This is usually listed in the "Options" or
"Settings" section of the main menu of the game.
• Refer to your specific game's manual for details.
14