Ardo AMARYLL Instrucciones De Uso página 5

3. How to use
3.1 Assembly
Important: boil before first use (see section
on cleaning). Assemble according to the
instructions.
1.) Important: place the membrane
pot securely over the groove of the
membrane con rod. (Membrane pot:
the smooth side of the membrane pot
should face outwards).
2.) Put on the casing cover, so that one
mark of the casing cover lies on top of
the mark of the breastshell, then rotate
the casing cover about 0.5 cm clockwise
3.1) standard Position
3.2) lever position for left-handed users
3.3) lever position for right-handed users
3.) The lever is mounted on the membrane
con rod and by means of light pressure
downwards clicks into the casing cover.
3.2 Pumping
• Wash your hands, sit down comfortably and relax.
• Turn the casing cover to the desired position.
• Centre the nipple so that, when pumping, it moves freely in
the breast shell / breast shell insert, and pump by activating
the lever.
• Adjusting the suction intensity: the further you press the
lever, the greater the suction intensity.
• Adjusting the speed interval: the faster you move the lever
up and down, the higher the pumping frequency.
• Our recommendation: begin at a high speed interval and a
low suction intensity in order to stimulate the milk ejection
reflex. Once the milk is flowing, reduce the speed interval
and increase the suction intensity.
2
1
1
2
3
3.1
3.2
3.3
en
1
2
5