Usage Of The Engine; Use Of Ac Alternating Current; The Outputting And Overloading Indicator Lights - Zipper Maschinen ZI-STE1000IV Manual De Instrucciones

2.6 USAGE OF THE ENGINE

In order to prevent getting an electric shock because of incorrect operation, the engine
should be earthed. The earth port of the engine and the outside earth source are
connected by a thick cable.
As spare electrical source for buildings, the
connection between generator and other
electric power system must be operated by
professional electricians. And the operation
must comply with the related laws and
electric regulations. Otherwise, the current
of the engine may feed back to the public
circuit. In this case, if the workers from electric power company or other people touch the
wire when transmitting electricity, they may be shocked by electricity to death. On the
other hand, when public electricity power is stored, the engine may burn, explode, or cause
fire to the building's electric power system.
1 – Sign of grounding (Fig. P)
Do not exceed rated power, and the total watt of the connected electrical equipments
should be considered.
Do not exceed the fixed current limit of socket.
Do not link the engine to the household circuit, or else the engine or the household circuit
would be damaged.
Do not modify the engine for other unrealized purposes.

Use of AC alternating current

1. Start the engine, and make sure the indicator light (green) is on.
2. Make sure that the switch of the electrical equipment to be used has been turned off, be-
fore to plug it into the generator.
3. Start the equipment
A – Overloading indicator light (Fig. Q)
B - Fuel alarming indicator light (Fig. Q)
C – Plug (Fig. R)

The outputting and overloading indicator lights

If the generator is in a good working order, the outputting indicator light (green) is on. If the
generator overloads (over 2KVA), or in case of a short circuit inside the electrical machine it links
to, the outputting indicator light (green) will turn off, while the overloading indicator light (red)
will lighten. At this time, the current to the linked electrical equipment will be cut off. If the red
indicator light is on, you should turn off the engine, and examine why it is overloaded.
Before you link the wire to the generator, first examine if it is in good working order, and whether
its electric power level exceeds the generator capacity or not. Then engage the cable of the
electrical equipment and start the generator.
1 – Overload (RED) (Fig. S)
Z.I.P.P.E.R Maschinen Austria  www.Zipper-maschinen.at
If all the installations that are con-
nected have been earthed, make
sure to earth the engine
2 – Ground end (Fig. P)
2 – Outputting (GREEN) (Fig. S)
I M P O R T A N T
Seite 29