Balancing The Trimmer/Brushcutter - Stihl FS 56 Manual De Instrucciones

English
Balancing the
Trimmer/Brushcutter
The type and style of the harness and
carabiner (spring hook) depend on the
market.
The carrying ring is integrated in the
control handle on loop-handled units–
see "Main Parts". Loop-handled units do
not need to be balanced.
Attaching the unit to the harness
2
1
2
Attach the carabiner (1) to the
N
carrying ring (2) on the drive tube.
30
1
Loosen the screw (3).
N
Floating position
Mowing heads and grass cutting
N
blades should just touch the ground.
Proceed as follows to adjust the floating
position:
Move the carrying ring up or down
N
the drive tube – tighten the screw
moderately – let the unit go and wait
until is its balanced – then check the
floating position.
When the correct floating position has
been reached:
Tighten down the screw on the
N
carrying ring firmly.
Detaching the unit from the harness
1
2
Press down the bar on the
N
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
FS 56, FS 56 R, FS 56 C, FS 56 RC
1
2