Operating Instructions - skilsaw SPTH70M Instrucciones De Funcionamiento

One setting may not be sufficient for cutting all materials. If excessive blade slippage occurs,
tighten the blade stud a fraction of a turn more (less than 1/8 turn). Over-tightening the blade
stud nullifies the effectiveness of the clutch.
Fig. 2
Fixed Auxiliary
Handle
Upper Guard
Lower-Guard
Spring
Saw Shaft
Shaft-Lock
Button
MOUNTING REMOVABLE AUXILIARY
HANDLE
Place the removable auxiliary handle onto the
threaded hole on the upper guard,
(Fig. 3). Turn the handle clockwise until it is
screwed tightly in place.
WARNING
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
WARNING
or missing parts. If damage or missing
parts are detected, have the tool repaired
before use. Use of this product with damaged
or missing parts could result in serious personal
injury.
WARNING
12
Lower Guard

Operating Instructions

Remove the battery pack
from the power tool
Inspect the tool prior to
every use for damaged
Do not attempt to modify
this tool or create
Blade
Outer Washer
Large diameter faces blade
Fig. 3
accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious injury.
WARNING
with the battery packs and chargers listed
below:
Battery Pack
SPTH15
NOTICE: Please refer to the battery and
charger manuals for detailed operating
information.
Lower-Guard Lift
Lever
Inner Washer
Large diameter faces blade
Blade Stud
Tighten
Loosen
Removable
Auxiliary Handle
This cordless circular
saw must be used only
Charger
SPTH14