Descriptions For Control Board Terminal - toscano TDS600 Serie Manual De Usuario

3.6.2. 3.6.2 Descriptions for control board terminal
01. CN3 and CN4 terminal layout as following
02. CN3 and CN4 terminal function description show as Table 3-5
Type Symbol Description
X1 Multifunction input 1
X2 Multifunction input 2
X3 Multifunction input 3
X4 Multifunction input 4
X5 Multifunction input 5
X6 Multifunction input 6
X7 Multifunction input 7
Multifunction input 8/
X8/DI
high-speed pulse input
+24V +24V power source
External power source
PW
input
+10V +10V power source
COM Common interface
GND Common interface
142
Terminal Function and specification
Input voltage range: 15~30V;
Opto coupler isolation, Compatible with bipolar
input;
Input impedance: 4.7KΩ
max input frequency: 1KHz
Except for X1~X7 function, it can be used as hi-
speed pulse input.
Input impedance: 2.2KΩ
max input frequency: 50KHz
Provide +24V power to external device (24±4V)
Max output current: 200mA
factory default connect to +24V; when use
external signal to drive X terminal, it need to
connect to external power source and cut off
with +24V power terminal.
Provide +10Vpower to external device (10±0.5V)
Max output current:50mA
Reference ground for digital signal and +24V
power
Reference ground for analog signal and +10V
power