Digital Input Terminal Wiring - toscano TDS600 Serie Manual De Usuario

01. AO1, AO2 terminal can connect to external analog meter, which can
indicate several physical quantity, it can select analog voltage or current
signal output, and switch through SW3 and SW4, wire as below:
01.
Under analog input mode, fi lter capacitor or common mode choke
can be installed between AI1 and G
D or AI2 and G
D.
02.
Analog input and output signal can be interfered easily by
ambient environment, it need use shield cable for connection and
earth grounding well as short as possible.
3.6.4. Digital input terminal wiring
01. To use inverter inbuilt +24V power supply, and NPN source type external
controller connection mode.
Fig.3-13 AO1,AO2 terminal wiring diagram
Fig.3-14 inbuilt 24V source type connection mode
3. Installation and wiring
145